Difference between RC5, R1000 U-spec, R1000 A-spec terminals and parameter defaults |
|
||
The tables below show the differences between the terminals and the default factory parameter settings for RC5, R1000 U-spec and R1000 A-spec regenerative units. The R1000 power regenerative units for the Japan region and the R1000 for the U.S. region have different terminals and programming. The digit after the second R denotes the region for the R1000 drives.
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Due to the differences in programming, control board, firmware and terminal boards, the R1000 components for models from different regions are not interchangeable.
|
|
||
1000 Series, |
|
||
Advanced Random Rotary Knife with Cam Blend, Air Compressor, Blister pack Thermoformer, Cartoner, Centrifuge, Conveyor, Crane/Hoist, Dynamometer, Elevators and Escalators, Extrusion, Fans/Blowers, Feed To Length, General Machinery, HVAC, Irrigation, Labeler, Laundry, Linear Flying Shear, Machine Tool, Mixer, Other, Packaging, Palletizer, Precision Grinding, Pump, Punch Press, Rotary Knife, Rotary Placer, Rotary Table Indexer, Screw Feeder, Semiconductor, Solar Cell Tabbing and Bussing, Solar - Textured Etching, Synch-Belt, Textile, Winding, |
|
||
R1000 Regenerative Unit, |
|
||
RC5 vs R1000 U-spec vs R1000 A-spec.xlsx
|
Last Modified Date: 10-13-2023ID: 10742 |
|